Thread Break Indication
What happens when the THREAD BREAK STOP indication appears but the upper thread and bobbin are still attached?
Reasons and Solutions
This is called a false thread break. The most common cause is that the thread has fallen off the thread sensor wheel.
Ensure the thread is wrapped around the thread sensor wheel correctly. Often times, the thread gets wrapped behind the sensor wheel
Related Articles
Video: SWF Embroidery Machine Training Tip - Thread Break-Bobbin Run Out
Thread Breaks
If you are experiencing thread breaks, there are a few diagnostic steps we can go through to narrow down the problem. The first thing you want to do is to determine if the thread is breaking on all needles, or just one If you are experiencing thread ...Why is thread not trimming
What could cause the thread not to trim all the time? Reasons and Solutions: Tension can be incorrect. Ensure the Upper Tension and the Bobbin Tension are correct.VIDEO Adjusting the Thread Cutting Angle CAM
Part 1 Part 2 Part 3VIDEO Piggybacking to thread your machine