LED - CAP and FLAT settings
How do I SWITCH the machine between CAP and FLAT settings in the standard control panel?Press the MACHINE button.
Press the DOWN button. The "2) Machine Function" command will be highlighted.
Press the SET button. The "1.Flat, Cap: Flat" command will be highlighted.
Press the appropriate number depending on which you will be sewing.
Press the SET button. Press the PREVIOUS button twice.
Related Articles
Switch the machine Cap and Flat settings
Using the STANDARD Controller: Press the MACHINE button. Press the DOWN button The "2) Machine Function" command will be highlighted. Press the SET button. The "1. Flat, Cap: Flat" command will be highlighted. Press the SET button. The machine will ...
Viper Default Menu Settings
The Attached PDF cover the Viper Default Menu Settings.
Removing the Cap Driver
How to REMOVE THE CAP DRIVER on the compact machine. Reasons and Solutions: Your Compact machine will be delivered with the cap driver installed. To remove it for flat sewing, there are a few minor steps. A. Looking from the front of the machine, you ...
LED - Clear a design
How do I CLEAR a design that is currently on my machine in the standard control panel? Press the STOP button. Hold down the SET button until the machine beeps rapidly and the LCD screen blinks "Design End Code"
LED - Basic setting
How do I put in my basic setting on the standard control panel? Go to 1. BASIC SETTING Press the SETTING button. Using the DOWN key to 3. Angle the input 0-for Flat and 180- for Caps. Press the SET button.