Error eject is flashing

Error eject is flashing

Why is the error eject button flashing?

DTG troubleshooting

Reasons and Solutions:

1. Flashing together with LED ink lights

DTG troubleshooting

**Data spooling is incomplete or interrupted. Power off and unplug to reset the printer.

**If resetting the printer did not solve the problem the encoder strip may be dirty. Clean the encoder strip with a damp cotton swab.

Prevention: Follow suggested maintenance routine.

**The print head or tray bed movement is being interfered with. Oil the print head carriage bars. Check the tray bed movement when loading and ejecting for friction or something foreign interfering.

Prevention: Follow suggested maintenance routine.

2. Flashing alternately with LED ink lights

**Waste Ink counter has exceeded its limit. Waste Ink counter needs to be reset.

3. Flashing with Power button

**Machine has been powered on with a print job in the print queue. Remove all jobs from the print queue and reset the printer.

4. Flashing rapidly

**This indicates something abnormal with the circuits. Contact your dealer for support.

    • Related Articles

    • ERROR 300

      What is an ERROR 300 (Needle is not aligned over needle plate) and how to clear it. Reasons and Solutions: A. Press any needle number other than the one that you are currently using. NOTE: If you have a compact machine and do not have the new compact ...

    • ERROR 602

      This error is indicating that there are no designs on the floppy disk or they are in an incorrect format. Make sure that the designs on the floppy disk are in a machine format that is compatible with the SWF machine.

    • Error 100

      What is an ERROR 100 (Main Shaft is not at the Fix Position) and how to clear it. Reasons and Solutions: A. IMPORTANT: Consult the Main Drive System pages of the Parts Manuel that came with your machine for further help with parts numbers. On a 601c, ...

    • kiosk will not eject

      Kiosk tray bed would not eject.  It just buzzed when she pressed eject.  The tray bed rail was catching on the inside part of the black cover.  Bent it back and it loads and eject fine now. 

    • buttons go inactive when Eject

      Why do the Load and Eject buttons go inactive when Eject is pressed and held in the eject position. Reasons and Solutions: 1. The eject and load sensors have lost orientation when the tray bed moves further out **Turn machine off and power back on. ...