ERROR 300

ERROR 300

What is an ERROR 300 (Needle is not aligned over needle plate) and how to clear it.
Reasons and Solutions:

A. Press any needle number other than the one that you are currently using.

NOTE: If you have a compact machine and do not have the new compact machine software, please download it now.


    • Related Articles

    • ERROR 602

      This error is indicating that there are no designs on the floppy disk or they are in an incorrect format. Make sure that the designs on the floppy disk are in a machine format that is compatible with the SWF machine.
    • Error 100

      What is an ERROR 100 (Main Shaft is not at the Fix Position) and how to clear it. Reasons and Solutions: A. IMPORTANT: Consult the Main Drive System pages of the Parts Manuel that came with your machine for further help with parts numbers. On a 601c, ...
    • Error eject is flashing

      Why is the error eject button flashing? Reasons and Solutions: 1. Flashing together with LED ink lights **Data spooling is incomplete or interrupted. Power off and unplug to reset the printer. **If resetting the printer did not solve the problem the ...
    • DTG HM1-C Error Light Codes

      The printer is busy. This may be a normal startup cycle or a head cleaning. If the carriage has moved, then the INK button has been pressed. Press the INK button again.       The Epson mainboard believes that the waste tank is full (NOTE: this is not ...
    • Video: SWF Embroidery Machine Training Tip - Power Up & Error 100, 300

      Please click the link to view the video: http://youtu.be/E5-U-ts090Y