DTG VIPER QUESTION

DTG VIPER QUESTION

When printing both sides of a shirt is it ok to pretreat both sides and then print. I explained that you need to pre-treat, press, print, and cure one side and then repeat the process for the other side. I explained that when curing the first print the pre-treat on the other side becomes unstable and will not wash well.

    • Related Articles

    • DTG Viper Print Quality

      Prints squash and blur at the beginning of the print but then works itself out as it prints. The set screws were loose on the PF drive gear on the conveyor cylinder.

    • Video: DTG Viper Maintenance

      Please click the link below to view the video: http://youtu.be/7rIgERkTvZ0

    • DTG Viper Printer Manual

      Below is the DTG Viper (Direct to Garment) Printer manual in PDF format.

    • DTG Viper Belt Tensioning VIDEO

      This video will walk you through how to adjust the carriage belt tension on the DTG Viper.

    • DTG VIPER NO MNT TNK

      Symptom: NO MNT TAK error on start up When the customer turned Viper on he was getting the 'NO MNT TANK' message and the machine failed to continue start up and had red flashing light on print carriage. I had the customer reinsert the Maintenance ...