DTG Daily Maintenance

DTG Daily Maintenance

Daily

  1. Inspect printer to make sure there are no foreign objects that will interfere with head or bed movements
  2. Clean print head assembly with damp cloth (can use window cleaning solution and paper towels) - DO NOT WIPE BOTTOM OF PRINT HEAD ASSEMBLY - DAB IT ONLY
  3. Top off ink bottles (especially white)
  4. Run 2-3 head cleanings from the control panel
  5. Check remote waste ink tank - empty and replace if needed 

    DTG troubleshooting

  6. Run nozzle check from Epson 2200 driver - perform head cleanings if needed

    • Related Articles

    • VIDEO: Maintenance - Daily Start Up

    • VIDEO: Maintenance - Daily Shut Down

      Daily shutdown maintenance of the M2: http://youtu.be/jXpOXbqEawU

    • DTG Weekly Maintenance

      Weekly Clean the wiper with cleaning solution or window cleaning fluid and cotton swab or paper towel  Clean capping station - pay special attention to cotton fibers around the edges of the cap area can be done with cotton swab, paper towel or soft ...

    • Monthly DTG Maintenance

      Monthly DTG Maintenance Monthly Change waste pad on opposite side from print head - this can be turned over for longer life  Oil print head carriage rail Flush white ink lines with distilled water and refill Consolidate white ink and thoroughly clean ...

    • Video: DTG Viper Maintenance

      Please click the link below to view the video: http://youtu.be/7rIgERkTvZ0