DTG

DTG

Kiosk tray bed would not eject. It just buzzed when she pressed eject. The tray bed rail was catching on the inside part of the black cover. Bent it back and it loads and eject fine now.

    • Related Articles

    • DTG M2 User Manual

      Attached is the manual for the DTG M2.

    • DTG RipPro V03 Download

      INSTRUCTIONS: This procedure will not effect your validation if done correctly. You must have your Product Code when reinstalling DTG RIP Pro. If  any  mistake is made when  entering your Product Code you will lose your validation and will need to ...

    • DTG Weekly Maintenance

      Weekly Clean the wiper with cleaning solution or window cleaning fluid and cotton swab or paper towel  Clean capping station - pay special attention to cotton fibers around the edges of the cap area can be done with cotton swab, paper towel or soft ...

    • Monthly DTG Maintenance

      Monthly DTG Maintenance Monthly Change waste pad on opposite side from print head - this can be turned over for longer life  Oil print head carriage rail Flush white ink lines with distilled water and refill Consolidate white ink and thoroughly clean ...

    • VIDEO: DTG M2 - Anatomy