How do I assign the SAME NEEDLE NUMBER MORE THAN ONCE IN A ROW without the machine stopping after the color change?
Answer:
- This feature is only available with the LCD controller.
- Load the desired design as normal.
- Press the SETTING Button (F3)
- Press the NEEDLE Button (F5)
- Press the CONVERT Button (F2)
- Use the Left Arrow (F1) or Right Arrow (F2) to highlight a needle number that is not being used in the current design; For Example: 12
- Press the number of the needle you wish to repeat; For Example: 7
- Press the PREVIOUS button (F8)
- Press the SELECT Button (F1)
- Select the desired needle sequence as normal using the alternate needle number when the same needle needs to run in a row.
- Press the PREVIOUS Button (F8)
EXAMPLE: Given the numbers above, if the needle sequence (7,12,7) is input into the machine, the design will sew in one color (7) without stopping.
Related Articles
Adjusting Needle Bar Depth
The attached pdf goes over adjusting needle bar depth
Problem Centering the Needle
When the design calls for needles 11-15, the needle will set up off center and we get an error message. We have to manually adjust these needle to center. Needle 15 does not work at all as when it is called the machine moves to its far limit, shakes ...
Changing needle plates
Why CHANGE NEEDLE PLATES from caps to flats? Reasons and SolutionsBecause the Cap needle plate has a higher center which fills the gaps in between the arm and the cap sash.
VIDEO Replacing the Needle Bar
Change the background and needle default colors in EO Design
By default, the software installs a black background and standard needle color sequence in the palette for the EO Design program. You can change these settings temporarily for the current design, or save them as a default setting to automatically ...